• Post author:
  • Post category:Hot Tubs

tiger river hot tub

Checking the Work of the Hot Tub Covers Before Buying Them

The tiger river, hot tubs have made their presence felt in the cities of Florida, the hot spots of America. If you are planning to enjoy the charm and warmth of the world-famous spa areas of Florida, then you should buy one of the tiger river hot tub covers. These are the best way to keep the spa water clean and also to retain the spa cover safe and sound. The hot tub cover is an essential accessory for any type of hot tub. It protects your hot tub from all the forces of nature as well as from the harmful effects of external menaces such as hurricanes and strong winds. It also helps to keep your spa in tip-top shape at all times.

The best thing about the hot tub covers is that they come with a set of essential tools. Hot tub cover can be easily removed and put back on after using it. This is very handy and hence, most spa covers sold in the market come with the basic tools for easy replacement. The parts required to replace the spa cover are the valve, the seat, the armature, the seat lift arms and the reset button.

Most of the spa covers sell online come with instructions manual, which acts as an added advantage. The manual often contains specifications and measurements of the various parts and the procedures involved in the replacement process. Most of the instructions even provide the troubleshooting tips in case you are not sure how to do the replacement. The most important part of the instructions or manual is the list of tools required in the replacement of the spa cover. Tiger River hot tub covers usually include detailed information regarding the tools needed for the job.

Before starting the job, ensure that all the water temperature sensors of the hot tub are turned on. The temperature sensors to determine when the water is at the set temperature. When it is time to turn the jets on, raise the dome or cover them with the help of the seat lift arms or the seat arms and then pull the valve lever fully and open the valve. In some models of the spa, there is a control switch that can be used instead of the lever and opens or closes the jets. Check that all the sensors are turned on and adjust the water temperature accordingly.

Once you have done this step, unplug the hot tub from the power source and disconnect the power cable from the power socket. With the help of the seat lift arms or the seat armrests, position the spa so that the opening in the side of the spa faces towards the ceiling. Turn on the jets and fill the water into the spa. Open the control panel of the spa and locate the light button. Press this button and wait for at least 10 seconds to see whether the temperature control is adjusted appropriately.

Once you are sure that the setting has been corrected, open the main valve of the spa cover and remove the spa cover. Take note that there are two jets in the tub; one jet is designed to fill the entire spa while the other jet is designed to shoot the water up to the ceiling of the spa. When you are done, open the valve of the spout and fill the spa up to the desired water temperature.

The second step involves the removal of the hot tub cover, raising the spa and positioning it over the rim of the spa. After this, you will have to slide the hot tub cover off the rim and position it over the rim. Press the main button on the remote control and set the timer or the reset button on the remote control according to the type of spa you have. Once you are done, you should open the valves of the spouts and fill the hot tub up to the desired temperature.

The third and final step is to test the system. To do this, you will have to open the valves of the spouts and place them inside the spa cover. Close the valves and wait for a few minutes. If everything is working properly, then the hot tub covers are ready for use.